Foil eraser 88mm 4500 rpm – with adapter – for drill – sticker removal

Foil eraser – effective removal of foils, stickers and boat names

Professional foil eraser for the quick and gentle removal of decorative stripes, foils, stickers, double-sided tape, and similar adhesive residues. This 88 mm diameter eraser disc operates at up to 4500 rpm and removes stubborn foils without damaging the surface. A drill adapter is included – ready to use immediately.

Ideal for removing old boat names, registration numbers, advertising stickers, and decorative films. The special rubber compound heats up during rotation and loosens the adhesive without leaving scratches or damage. Works on gelcoat, paint, metal, and most plastics. Significantly faster and gentler than mechanical scraping or chemical removers.

Product features:

• Diameter: 88 mm – generous work surface
• Max. speed: 4500 rpm
• Adapter for drill included
• Removes foils, stickers, decorative strips
• Gentle on the surface – no scratches
• For gelcoat, paint, metal, plastic
• Ideal for boat name removal
• Ready for immediate use

Technical specifications: Diameter 88 mm, max. speed 4500 rpm, adapter for drill included, rubber compound specially designed for film removal, for gelcoat, paint, metal, plastic.

Areas of application:

• Remove boat names and registration numbers
• Remove decorative stripes and foils
• Remove stickers and decals
• Remove double-sided tape residue
• Advertising stickers and lettering
• Remove old foil
• Adhesive residue on gelcoat and paint
• Preparation for relabeling

Operating principle: The special rubber compound of the film eraser heats up through rotation and friction. This heat loosens the adhesive of the film or sticker, allowing both to be removed together. Unlike mechanical scraping or scratching, the film eraser works gently without damaging the surface. It is also superior to chemical removers, which often contain aggressive solvents.

Application: Clamp the adapter into the drill chuck and tighten. Attach the film eraser to the adapter. Set the drill to medium speed (2000-4500 rpm). Place the eraser disc flat against the film to be removed. Apply light pressure and move it over the film in circular or straight motions. The film will loosen and curl up. Adhesive residue is removed simultaneously. Repeat if necessary.

Tips for best results: Do not apply too much pressure – the rotation and heat will do the work. For very old, hardened films, gently warming them with a hot air gun can make removal easier. After removal, clean the surface with silicone remover. For sensitive surfaces, test on an inconspicuous area first.

Safety instructions: Wear safety glasses – debris from the film can fly around. Do not operate at excessively high speeds (max. 4500 rpm). Securely mount the eraser disc onto the adapter. Replace immediately if it becomes unbalanced or damaged. Choose a well-ventilated area.

Care and lifespan: Clean the eraser disc of any film residue after use. If heavily soiled, rinse with water and allow to dry. Store in a dry place. Lifespan depends on usage – several square meters of film can be removed with normal use. Replace if heavily worn or hardened.

The vinyl eraser is the professional tool for the quick and gentle removal of vinyl, stickers, and boat names. With an 88 mm diameter and speeds up to 4500 rpm, the eraser disc works efficiently without damaging the surface. An adapter for a drill is included – ready to use immediately. Significantly faster than mechanical scraping and gentler than chemical removers. Works on gelcoat, paint, metal, and plastic. Ideal for removing boat names, decorative stripes, and all types of stickers.